TDPAC and first-principles study of electronic and structural properties of a Pd-vacancy complex in undoped germanium

Pd is one of the metals suitable for inducing low-temperature crystallization in Ge. However, it is not clear how residual Pd atoms are integrated into the Ge lattice. Therefore, time-differential γ–γ perturbed angular correlations (TDPAC) technique using the ¹⁰⁰Pd(→¹⁰⁰Rh) nuclear probe produced by recoil implantation has been applied to study the hyperfine interactions of this probe in single-crystalline undoped Ge. A Pd-vacancy complex aligned along the <111> crystallographic direction with a unique interaction frequency of 8.4(5) Mrad/s has been identified. This complex was measured to have a maximum relative fraction of about 76(4)% following annealing at 350 ^°C. Further annealing at higher temperatures reduced this fraction, possibly via dissociation of the complex. Calculations suggest dissociation energy of 1.94(5) eV for the complex. DFT calculations performed in this work are in reasonable good agreement with the experimental values for the electric-field gradient of the defect complex in Ge and Si for comparison. The calculations predict a split-vacancy configuration with the Pd on a bond-centred interstitial site having a nearest-neighbour semi-vacancy on both sides (V-Pd_BI-V) in Ge and Si.     

基于横向莫尔条纹的自准直测角方法

本文提出了基于横向莫尔条纹的自准直测角方法,用遮光原理分析了莫尔条纹的位移放大作用.并基于该方法搭建了原理光路,得到的莫尔条纹信号稳定且能够满足测量需求.在此基础上对系统进行了定量标定,简化了数据处理步骤,实现了动态测量,系统分辨率达到10″,进一步明确将该方法应用到自准直仪中可以有效提高仪器分辨率.     

油-气-水三相流超声传感器持气率测量*

为探索油-气-水三相流持气率测量难题,该文开展了脉冲透射式超声传感器持气率测量动态实验研究。首先,利用超声传感器与光纤传感器组合,测取了油-气-水三相流中段塞流、混状流、泡状流的响应信号;其次,提取了超声脉冲信号的最大值序列来反映不同流型时超声传感器响应特性,同时,借助双头光纤传感器与相关测速法,计算得到了流体中气泡弦长序列;最后,结合流型与泡径信息,利用超声传感器测量了不同流型下持气率,并分析了不同流型持气率预测的误差来源,为其他油-气-水三相流持气率测量传感器设计提供了借鉴。     

Optic Fiber Interferometer for Absolute Distance Measurement

1.IntroductionAbsolutedistancemeasurementisfarfromanewtopic.However,itisstillafieldstimulatinggreatinterestsnowadaysduetoitSimportantroleinmanufacturingandassembly['J.SincethegreatsuccessachievedbyMichelsonandBenoitwhentheyfirstdevelopedaninterferometertodeterminethestandardmeterintermsofthemonochromaticredcadmiumline,theopticinterferometerhasbeenprovedtobeoneofthemostpreciseandefficientwayindisplacementmeasurementbecauseofitshighdiscriminationandsimplestructure.However,thetraditionalinterfe…     

数字散斑相关方法及其在碳纤维复合材料压力容器变形测量中的应用

提出了一种新的基于图像灰度梯度迭代的数字散斑相关方法(DSCM,digital speckle correlation method)。通过使用DSCM测量碳纤维复合材料压力容器在水压下的局部区域的位移场和应变场,分析了复合材料压力容器的轴向和环向的变形特征,为碳纤维复合材料压力容器的优化设计提供了理论和实验依据。     

一种利用电光效应测量微小转角的新方法

利用线性电光效应发展出一种新的、高准确度的微小转角测量法.根据W.L. She等人提出的线性电光效应耦合波理论，求得出射光强与入射光强比值（即出射率）对入射光方向的依赖曲线，利用该曲线，通过测量出射率可以确定入射光的方向.并根据此原理，设计了一套简单的装置，该装置可以测量出物体微小转角的变化量，同时测量范围及准确度都可通过外加电场和入射光波长加以调节.对此微小转角测量法作了理论分析，在LiNbO3器件上，得到测量范围大于3′，准确度为3.5″的设计结果.     

On the Boltzmann Equation for Fermi–Dirac Particles with Very Soft Potentials: Averaging Compactness of Weak Solutions

The paper considers macroscopic behavior of a Fermi–Dirac particle system. We prove the L ¹-compactness of velocity averages of weak solutions of the Boltzmann equation for Fermi–Dirac particles in a periodic box with the collision kernel b(cos θ)|ρ−ρ _*|^γ, which corresponds to very soft potentials: −5 < γ ≤ −3 with a weak angular cutoff: ∫₀ ^π b(cos θ)sin ³θ dθ < ∞. Our proof for the averaging compactness is based on the entropy inequality, Hausdorff–Young inequality, the L ^∞-bounds of the solutions, and a specific property of the value-range of the exponent γ. Once such an averaging compactness is proven, the proof of the existence of weak solutions will be relatively easy.     

93W合金有关力学参量的综合选评

 对93W合金材料进行了超声测量实验，并结合原有的超声测量结果进行了分析比较，提出了可以直接用冲击波速度关系式的三个系数c₀ 、λ和λ′来对钨合金的有关力学参量，如G₀、K₀、G₀′、K₀′等进行综合选评的方法。得到了一组对93W合金较为合理的力学参量推荐值。     

FTIR光谱遥测红外药剂的燃烧温度

本文利用遥感FTIR光谱，对红外药剂的燃烧特性进行了研究。在分辨率为4cm^-1时，收集4700－740cm^-1波段的光谱。从HF等燃烧产物发射的分子振转基带精细结构的谱线强度分布，可以对燃烧温度进行遥感测定，并给出了燃烧温度随时间的变化关系，实验结果表明燃烧表面附近温度梯度很大，存在着急剧的变化温度场，同时也说明，在不干扰火焰温度场的情况下，利用遥感FTIR光谱对剧烈的、非稳态快速燃烧的火焰温度进行连续实时的遥感测量，是一种快速、准确、灵敏度高的测温方法，显示了它在燃烧温度测量、产物浓度测试以及燃烧机理研究等方面的应用前景。     

用不确定度评价测量结果中的有效自由度的作用

论述了有效自由度的计算方法及有效自由度量值在分析测量结果中的应用。